G81 of loop of end panel cutting dictates

  • Time:
  • Click:132
  • source:DELENO CNC Machining
＊ onefold cutting dictates circularly (G80, G81, G82)2) A of instruction of G81 of loop of end panel cutting.

G81 X__Z__F__ of loop of end panel cutting sees a picture 1 25 one are shown. Implement this directive, start of annulus of cutting tool Cong Kan (A is nodded) begin, via circular start A everything is cut only then C of one cutting terminus retreats dot B knife dot D circulates start A4 paragraph orbit, among them AB, DA paragraph move by fast R, BC, CD paragraph move by instruction speed F. X, Z is worth the coordinate value that is cutting terminus C when absolute instruction, cutting terminus C is when increment dictates relative to the distance at circular start A. B.

Take G_X __Z__K__F__ of loop of cutting of taper end panel: See a picture 1 26 one are shown. Among them X, Z is the same as afore-mentioned accord. K value is cutting only then relative to as terminal as cutting C bit days the shift in Z axis is apart from, namely ZB, ZC. It is when arithmetical value when K value takes stop: When be negative worth, k value is taken negative. %1027Nvalue="1" UnitName="g">1 Gvalue="91" UnitName="g">91 G81 X, 15 Z, Value="8" UnitName="F">8 Fvalue="300" UnitName="m">300 M03Nvalue="2" UnitName="g">2 G81 X, 15 Z, 11Nvalue="3" UnitName="g">3 G81 X, 15 Z, 14Nvalue="4" UnitName="m">4 M05Nvalue="5" UnitName="m">5 M30 for example: (see a picture 1, 28) %1028Nvalue="1" UnitName="g">1 Gvalue="54" UnitName="g">54 Gvalue="90" UnitName="g">90 G00 X60 Zvalue="45" UnitName="m">45 M03Nvalue="2" UnitName="g">2 G81 X25 Z31.

5K, Value="305" UnitName="F">305 F300Nvalue="3" UnitName="g">3 G81 X25 Z29.

5K, 305Nvalue="4" UnitName="g">4 G81 X25 Z27.

5K, 305Nvalue="5" UnitName="g">5 G81 X25 Z25.

5K, 3.

5Nvalue="6" UnitName="m">6 M05Nvalue="7" UnitName="m">7 M30 CNC Milling