Milling cutter of series of tornado of hill tall TURBO
- Time:
- Click:122
- source:DELENO CNC Machining
.
0602; Bit norms 6mm; Apmax=10 ~ 25mm. (2) the geometrical angle that milling cutter of corn of whirly of Micro Turbo of Micro Turbo whirly uses the cutting tool with advanced system of tornado of Turbo of hill tall cutting tool and bit, the material that is wide range and treatment provide the performance of efficient, low power comsumption and low noise. Besides conventional square shoulder treatment, microTurbo whirly milling cutter can be used at brae mill, model antrum mill, circumferential with helix interpolation milling. A lot of same treatment can use Super Turbo milling cutter of super tornado corn will machine, it still provides the capacity that increases cutting depth. Whirly and whirly corn milling cutter use identical bit, the material qualitative grade that supplies evidence of whole set experience and geometrical angle. The character of Micro Turbo whirly: Diametical limits 20 ~ 40mm; Fixed razor blade, have normal pitch and close tine type; Bit type XO.
.
0903; Bit norms 9mm; Apmax=47mm. (3) Super Turbo super tornado is beyond question, super Turbo super tornado is the first option that is used at application of milling of convention square shoulder. 12mm is big horny razor blade makes Super Turbo super tornado very can fast the material that finishs wide range and application. The character of Super Turbo super tornado: Diametical limits 25 ~ 63mm; Fixed razor blade, have normal pitch and close tine type; Bit type XO.
.
1204; Bit norms 12mm; Apmax=55mm. (4) what puissant tornado of Power Turbo of Power Turbo puissant tornado stresses burden is heavy. With cutting light razor blade uses machine tool power effectively, offer the oldest metallic excision rate, even if the material of the application of high demand and difficult treatment. Use 18mm old bit, supply the diameter of wide range, puissant tornado suits rougher treatment. The character of Power Turbo puissant tornado: Diametical limits 40 ~ 100mm; Fixed razor blade, have normal pitch and close tine type; Bit type XO.
.
1806; Bit norms 18 Mm; Apmax=62mm. CNC Milling